Carbon Fiber Front Wing for Reflex FX28 1/28 F1

Please Read all Description before purchase!

Please Read all Description before purchase!

Carbon Fiber Front Wing for Reflex FX28 1/28 F1
These are CNC cut Carbon Fiber & 3d printed front wings for the Reflex Racing FX28 F1 chassis.
Comes with screws for assembly (some oem screws will be reused from the original wing).

V2 Update:  The new V2 will be allowed in the PNWC ruleset.  It features a bottom plate that has a 2mm lip around the outside of the carbon fiber as required by the PNWC rules.  The overall dimensions are same as the original wing.

The wing features sides that are less likely to go under RCP rails and don't have "fish hooks" like the oem so when marshalled they are easier to pull out for the rail.  They also come with two add-on pieces that you can put on for more down force.  The overall dimensions are similar to OEM size.  The weight is approximately 4g more than the stock wing without the downforce add-ons, and about 6g heavier than stock with the add-ons.

Installation:
1-I suggest running a bead of CA
around the outside edge of the carbon
fiber to prevent splintering.
2-For the PNWC approved wing you
must run the printed bottom plate to
be PN legal. You can skip this step if
you are running rules that allow the
exposed carbon fiber.
2a-Start with the printed bottom plate, put a
small amount of shoe goo, gorilla glue,
some type of removable glue in the nose of
the printed plate.
2b-Next insert the carbon fiber plate into the
printed bottom plate, make sure it kind of
snaps all the way flat and flush in all corners
and edges.
2cAllow the glue to dry before racing.
3-Use the countersunk screws included in the kit to fasten the printed parts to the carbon
fiber.
4-The wing mounts to the chassis the same as the OEM wing using all the original screws
and the small CF part on top.
5-The OEM short screw that is used in the hole next
to the body post you can leave out it won’t have
anything to screw in to.

If any aftermarket components have been added to your FX28 I can't guarantee fitment, i can't test all combinations of aftermarket parts.

These parts are NOT indestructible.  The carbon fiber is much stronger than the OEM plastic wing but nothing is indestructible.

Please use these at your own discretion, they are NOT a guarantee to prevent breakage, if you hit anything hard enough or at the right angle you may break something.

I stand by my work 100%, I will do what I can to make it right if something isn't 100%, this is a hobby for me just like it is for you so I want everyone to be able to enjoy it.

NOTES: 

See the pictures for details, nothing in the photos are included other than the wing kit.

3D printed items can warp and melt in hot sun or left in hot places like a car or attic, use caution!

Note: none of these are guaranteed to prevent breakage.

Thanks for looking!